Different vape pens come with different unique hits ranging from cannabis hits to nicotine hits. The choice of a specific vape pen depends on your taste and preference. Vaping is an alternative for those who want to quit smoking but still want to feel the best effect of your favorite hit.
The Innokin Pocket Mod Starter Kit is a small all-in-one whipping device. It's a fun and easy-to-carry mod. The device has a 2000 mAh rechargeable battery, which should be enough for most users to run all day. There is a 2ml TPD compliant capacity which is top filled. The Pocket Mod's square shape is designed to be both stylish and practical, A unique cap design that covers the drip tip when not in use to protect it from dust and dirt.
It also has adjustable airflow, and it comes with an extra coil and tip. This enables Innokin Pocket Modto smoke by mouth to lungs (MTL) or direct lungs (DTL) smoking.
For starters, this won't break e-cig Bank! You can buy it for 40$. Innocent Pocket Mod is effortless to operate, compact and very powerful! It’s amazing that such a small thing could blow clouds so thick. Another handy feature is the exchange coils and tips. These make Pocket Mod very versatile, allowing you to switch from dense clouds to more moderate flow easily.
With a 1.2-ohm coil, you can expect around 10 to 13 watts in terms of power. This is the way to go if you want something like a real cigarette. The 0.35-ohm coil is preferred by most people. You can expect between 20 and 40 watts using it, so if you like large flavored clouds; you won't be disappointed!
Specifications
- Manufactured by: Innokin
- Threading: 510
- E-Juice Capacity: 2ml
- Maximum Output Wattage: 35W
- Resistance Range: 0.2ohm – 3.5ohms
- Voltage Output: 3.0V – 4.2V
- Battery Capacity: 2,000 mAh
- Height: 4.6in (117.48mm)
- Width: 0.94in (23.81mm)
- Depth: 0.94in (23.81mm)
- USB rechargeable
- LED light indicator
- MTL and DTL coils included
What's in the box?
Inside the Innokin Pocketmod Box, you can find the PocketmodSelf 0.35ohm Coil Head, 1.2ohm Coil Head, lanyard, Ultem wide bore drip tip, mouth to lung drip tip, Micro USB Cable, User Manual, Warranty Card, Warning Scroll, Battery Warning Cards, and stickers.
Build Quality & Design
This Innokin Pocket Mod is a small piece of kit that feels a little heavy in hand. The styling is impressive and elegant; however, the Pocket Mod looks very smart and has a soft-touch rubberized finish with a stainless steel band around the top.
A ULTEM wide bore drip tip is pre-installed on the Pocketmod for use with a 0.35ohm coil head. The box is a narrower bore black drip tip used with a 1.2ohm mouth to the lung coil. 510 drip tip threading is used, so you can easily switch to the drip tip of your choice. A removable top cap covers the top of the pocket mode when not in use to keep it free of dirt and dust.
Metal components look great - the entire airflow ring/coil holder top piece is metal and has a metal band around the body with cutouts for liquid viewing windows. It looks and feels very solid. The metal components add to the classy and robust feeling of this.
The Innokin Pocketmod is an all-in-one device, so the tank itself is built into the device. There is a glass view window on either side of the mode, so you can see how much e-liquid you have left, with the maximum fill line clearly marked. A USB charging port is found on one side, a power button and LED battery indicator on the other. The LED also lights up inside the tank section when you press the fire button, which sounds great!
How to operate?
First, you have to open the inner top cap and fill the e-liquid to the maximum filling line - don't fill past because when you re-insert the top cap, any extra e-juice will come out from the top! After filling, leave the e-liquid to sit in the tank section for at least five minutes so that it can soak properly into the head of the coil, which will also extend the life of your coil.
Adjustable airflow is available on the top cap, which allows you to adjust the airflow according to your desired draw. When it is fully open and a 0.35-ohm coil head is used, with a wide bore drip tip, it offers a fairly airy lung hit; if you would prefer a tighter draw, then use the 1.2ohm coil head with the narrower bore drip tip and close the airflow down to three-quarters open or less. The 0.35ohm coil head offers a hot vapor with higher vapor output, while the 1.2ohm coil head offers a cooler vapor with a more limited draw, the taste is even more intense.
Three power button clicks will turn on pocket mode, and you press the power button to vape. The pocket mode will adjust the wattage output according to the resistance of the coil head used, and it will output up to a maximum of 35W.
The LED light indicator will show you how long the battery life is left, glowing green when full, yellow when half full, and red when low. It is recommended to charge the battery as soon as the LED red light shows up. The 2000 mAh inbuilt battery lasts all day and charges quickly via USB.
How to Charge?
Use a supplied USB cable for charging, one end of which is connected to a suitable USB outlet, and the other is plugged into a port at the rear of the end mode. The lights will cycle through the colors while charging. They will go out when fully charged.
How To Change The Coil Head?
The head of the coil does not last forever. Unfortunately, if you see a poor performance or burnt taste, the head will need to be replaced. Also, if you accidentally fire it without enough liquid, it will damage the coil.
- Remove the airflow ring above the body.
- Open the coil at the base of the airflow ring.
- Install a new coil.
- Add e-liquid to the cotton areas shown on the head of the new coil.
- Fill the tank to the "maximum" mark.
- Replace the upper airflow ring on the body.
- Leave the pocket mode to stand for a while so that the liquid soak into the coil.
- Take a few puffs without pressing the fire button to get the liquid out of the coil.
Battery Life:
Using the 0.35ohm coil, I got 7.5 hours of wiping before the battery light turned red. The battery will last longer with a 1.2ohm coil - so at least 7.5 hours with a 2000mAh battery is best.
Pros:
- Compact and Easy to Operate
- Long Battery Life
- Interchangeable Coils and Drip Tips
- MTL or DTL Capable
- Adjustable Airflow
- Snap-On Top
- 2ohm MTL coil is perfect
Cons:
- The battery is not replaceable
- Coil head wicking holes too high.
- 35ohm coil doesn't work well on this.
FAQ
How do I turn on my Innokin pocket mode vape pen?
- Press the fire button three times to turn it on or off.
- Press the fire button while vaping.
The battery level indicator is:
- Green LED = full battery.
- Yellow LED = half-full battery.
- Red LED = low battery.
Why is my vape pen not working?
Inspect the battery contact; It can be filled or coated. If this happens, wipe the connection with the Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try again. Don't overload your cartridges.
Make sure your battery is on and entirely charged. Pull-to-draw batteries are always on. Batteries with buttons can be quickly turned on by pressing the button three times. If you're using a battery with a button, make sure you're holding down the button when you pull it out.
UPENDS:
As a vaper, you need a source to count on to provide you with the best vaping equipment. UPENDS.com promises you the best vaping equipment that combines quality and technology to ensure you enjoy the best vaping experience.
UPENDS.com lets you enjoy the best vaping experience within your budget. All of their vaping equipment comes at a wholesale price which saves you from rising prices.
To make sure they serve you better, UPENDS.com is hiring agents to distribute the vaping equipment. That way, you will receive their services at your doorstep.
Conclusion
For those looking for a stylish and sleek little cut, Innokin Pocket Mod is a perfect option to consider. It's a beautiful-looking setup that looks great when used in hand, and it performs well whether used in a mouth to lung or direct to lung mode. The coil's age is also good. The heads of the coil last for an average of two weeks. Innokins are famous for producing large kits, and Pocket Mod is another standard release by them!
