WARNING:  This product contains nicotine, Nicotine is an addictive chemical.

Innokin Plexar Vape pen Review and instructions

21st Aug 2021 | 209 | upends v

Looking for a pen style vape kit? The Innokin Plexar 100W starter kit offers a good bang for your buck, and hits up to 100W. It's compact, very easy to use, and uses Innokin acclaimed Plex3D Coil system, as you've seen with the Innokin iSub-B Sub-Ohm Tank. Although not every vapor wants a pen style tool, if you don't want to carry your heavy gear with you, this is a good kit with a good option to start vaping.

If you are looking for a compact, efficient, long-lasting pen, the Innokin Plexar will be in your street. With a sleek design and generous battery life, the Plexar is one of the best vaping pens in the current market.

The Innokin Plexar Kit is a single battery tube mod style device that comes with a Plex tank with a Plex 3D mesh coil. Boy, that's a lot of Plex’s floating around there!

Innokin has long been known for good quality products and recently won a couple of Ecigclick Vape Awards - the best kit for beginners with the Endura T18 (also ranked second for the best vape pen), The best MTL tank for the Innokin Zenith - so the plexar has a lot to survive!

The Plexar Stick is a semi-regulated, non-adjustable stick kit that draws voltage directly from your battery. It works like a mechanical mode but with many reservations inside. It supports a single 18650/20700, according to the ad, and is lucky enough to fit a variety of 21700 batteries. The maximum output of Plexar is 100 watts.

What’s in the box

  • 1 x Plexar Mod
  • 1 x PLEX tank
  • 1 x Spare Glass Tube (2ml for TPD – 4ml elsewhere)
  • 2 x 0.14Ω PLEX 3d Mesh Coil (1x Pre-installed)
  • 1 x 18650 battery adaptor
  • 1 x Micro USB Cable
  • 1 x Spare O-Ring set (Including top-fill seal)
  • 1 x Quick Start Guide
  • User Packet (Warranty cards/Battery Safety)

                                                 

Specs
  • Manufactured By: Innokin
  • Battery Capacity: 20700 mAh
  • E-Juice Capacity: 4.0 ml
  • Body Material: 304 Stainless Steel
  • Tank Material: Borosilicate Glass
  • Maximum Output Wattage: 100
  • Diameter: 1 Inch (25.6 mm)
  • LED Fire button
  • Slide door Top-Fill
  • 810 Drip tip compatible (If they include O-Rings)
  • Bottom Adjustable Airflow
  • Micro USB 1.5A Charging (With ‘Vape While Charging’)

Innokin Plexar Kit

                                                               

The Innokin Plexar Kit comes with everything you might need for a long-lasting vape pen experience. On opening the kit for the first time, you will be immediately greeted by Plexar mode and a PLEX tank. The mod is simple, and it has only one button and a charging port at the base of the mod. The charging port offers a micro USB connection, and the kit provides a micro USB charging cable. The tank has a capacity of 2 ml which is ideal for a vape pen of this size. The kit is packed with many additional components, such as a spare glass tube with a capacity of 2 ml and a spare 0.14-ohm PLEX 3D mesh coil.

A 0.14-ohm PLEX 3D mesh coil is already installed in the Plexar tank. This kit also includes a spare O-ring set. Plexar can't be easy to work with. Just click three times to turn on the LED fire button and press and hold the fire button again to hit. That's all there is to it. The maximum output of the Plexar is 100W, which is quite impressive for a vape pen of this size.

Design and Build:

Just like a good vape pen should be, the Innokin Plexar is very comfortable to hold. Plexar textured surfaces go a long way in making the pen feel like a precious piece of cut.

The fire button is also textured and has LED lights that flash the button when the device is turned on. Small details like these make Plexar feel much more expensive than that.

The large "PLEX" plastered on the face of the tank may stop some vape users as it may seem a bit complicated, but your hand usually covers that part, so it shouldn't be too annoying. The Plexar Kit is a very compact, strong piece that will keep you happy for a long time.

                       

Plex Tank

The tank is about 23 mm wide and has a base to drip-tip height of 50 mm. The paint finish is nice and smooth, and the 'PLEX' print on the side does not scratch off.

Filling the PLEX tank is very easy. All you have to do is pull back the top fill hatch at the top of the tank and carefully insert your favorite e-liquid into the hole.

                                                          

The hole is so big that it should be easy to put your e-liquid in it to avoid possible spills. Once filled, slide the filling hatchback from the top. Unfortunately, this hatch does not seem to have a locking mechanism, which means that the tank may leak if the hatch is loose in your pocket or bag. Airflow control is easily adjustable on the PLEX tank. There are two separate large airflow holes at the base of the tank.

They can be easily adjusted by rotating the bottom of the tank. The 2mL capacity of the tank may not be the largest in the market, but it works. Overall, the PLEX tank offers no modern design, but it does provide a solid component that works well.

The Mod/Body

The actual 'mode' itself is quite basic, with the Spring Load 510 connection above. An LED fire button located just above the pen runs under a nice straight, indented line style device. There is a bottle cap-style lid on the base to install/remove your battery.

Performance

Unlike some of its competitors in the market, the Innokin Plexar provides only one coil type for this kit, although it provides the same type of spare. The Scion Plex 3D 0.14-ohm coil, designed for use in the Plexar, is similar to the rest of the kit, it won't surprise you with its modern shine, but it does give you a perfectly solid, decent vapor experience with flavor and vapor production.

The coil included in this kit gives you a rich flavor after you break it properly, so don't worry if the taste looks a little dull at first. The blend of cotton and wood adds a unique flavor to the wit of the coils for the majority of e-liquid flavors, especially the more delicate flavors.

This can be quite diverse as some may like these extra notes of flavor while leaving others out. That being said, this coil will not cause any dry hits, and they will not let the taste of e-juice at least burn. The flavor produced with the included 0.14-ohm coil is sure to please every user of this vape pen.

Setting the Tank & Mod-Up

To set up the Kit for first use, it’s pretty simple:

  • Just screw the tank onto the body
  • Install a battery and screw the base back on
  • Slide the Top fill section of the tank and Fill the Tank with e-liquid.
  • Let the e-liquid seep into the coil for at least 5 Minutes
  • Press the fire button three times, and away you go!

Pros:

  • Simple to use
  • Pocket Friendly
  • Very good battery life
  • Well built
  • Multi-Battery Compatible
  • Good flavor & Vapour once broken in

Cons:

  • Gets way too hot
  • Middling battery life
  • Rattly battery compartment cap
  • Uncertainty with coil reliability

FAQ

How do I turn on my Innokin plexar vape pen? 

 

  • The Led fire button does everything.
  • Three clicks on/off
  • Press and hold to fire

Whenever you press the fire button, the LED light will show your battery charge level:

  • Green is Full
  • Blue is Half Full
  • Red is Low.

How to change coils?

 Here’s what to do:
  • Unscrew the base of the tank (Ensuring tank is empty of e-liquid)
  • Remove the glass tank section
  • Unscrew the coil
  • Fit new coil
  • Re-fit glass tube
  • Re-fit tank base

How to charge Innokin Plexar?

Just open the bottom cap and replace it with a new battery, or plug in a micro USB cable to charge the replaceable battery at 1.5A. With the 'charging vape' technology, Plexar will always be ready for vape!

UPENDS:

                                                    

Uppen:

Upcott:

By introducing a modern but simple structure, Upcott and Uppen eliminates all unnecessary expenses and offers consumers a pleasant steam alternative at a great price.

If you are a vape lover and want to try the best vapor, you must try these vaping products.

UPENDS.com is one of the best companies that offers you the best vaping devices at wholesale prices. Their products are beautifully designed and highly portable to carry anywhere, making them easy to use and safe. You have to enjoy the best experience of Vaping at affordable prices.

Conclusion

Innokin Plexar is sure to impress any experienced vaporizer, but it will also excite those newly entered the vaping scene. Its simplicity is both an advantage and a disadvantage, depending on what you look for in a vape device. But as far as vape pens go, the Plexar Kit is a great piece that provides good performance with good battery life; all packed in one clean and compact package.