Voopoo Drag Resin Edition Review and Instructions. A Review of the VooPoo Drag Resin Edition

    Voopoo Drag Resin Edition Review and Instructions. A Review of the VooPoo Drag Resin Edition

    VooPoo is a renowned and appreciated vape brand in the vape industry. The VooPoo Drag is a pod with a Gene chip with custom curves, 157W power output, and dual device, which can be charged using a micro USB cable or externally charged. 

    The chipset activates the vape to give it a vigorous flavour that is amazing. The launch of this pod system of the VooPoo drag resin edition has raised standards of vape products and has developed the tread for competitors. 

    VooPoo Drag Resin Edition Battery Life & Charging 

    The VooPoo Mod is a dual 18650 battery box mod that can fire up to 157W. The battery's size is 90 x 54 x 24mm with a resistance of 3VW, a connection threading of 510, and provides a temperature range of 200-600F/100-315C. 

    Its resistance ranges from 0.05ohm-1.5ohm(TC)/ 0.05ohm-3.0ohm(VW). The battery has accurate temperature control and wattage, overcharge protection and reverse battery protection to ensure the long last of the battery. 

    VooPoo Drag Resin Edition Pens and Pods

    The vape brand is well known for amazing and legit pens and pods. The VooPoo Drag Pod System comes with a long-lasting battery of 750mAh and an intelligent chipset that activates the vape to give massive flavour in ways. The pods are some of the most incredible products released, and they offer pocket-sized pods, easy to carry around.


    The introduction of these pods has led to raising the standards of vape products and setting up the pace for any competitor in the market. 

     The following are examples of some of the pods and pens that the VooPoo brand offers:

    VooPoo drag Nano

    This type of pod system was the first one to be ever produced by the VooPoo brand. It has developed fame because of its good performance, and its sleek design has made it fit perfectly for the palm and is very easy to use.  

    Battery functionality of the VooPoo Drag Nano Pod

    The Pod is designed with precision with the consumer in consideration. It has LED lights to indicate the battery percentage by getting different colours, and also on the side, it indicates when you need to recharge.


    When it indicates Green, it means the battery percentage is 60+, Blue means it's between 20-60, and Red indicates that the battery is below 20% and requires a charge. Charging this Pod uses a micro USB cable, and it can go for 350puffs if fully charged.

    VooPoo Drag Nano Pod Design 

    The Pod is available in several colours, each with a unique and stylish outlook, and this gives you an ultimate choice to choose the one that suits you. Its shell's made up of zinc alloy hence, lightweight and making it easy to carry around. 


    The Pod has a pod chip that provides a strong flavour once inhaled. Every puff is strong and legit, just like the first puff. The Pod has an LED indicator on the Pod's side to indicate the battery percentage and alerts the vape user when the device needs a charge. 

    The Pod features a 1.8ml tank, and it has a very innovative design compared to the sub-ohm tanks. It is easy to refill, charge and recommended for a great vaping experience. 

    Pod Chip functionality

    The pod chip ensures that you get consistent flavour without the e-juice running out once you have started your vaping process. Most of the vapours have asserted that the chip works. 

    Advantages of using VooPoo Drag Nano 

  • It is portable due to its lightweight
  • It has a long-lasting battery
  • It is small in size, hence easily pocketed
  • It is easy to refill, use and maintain the Pod
  • Disadvantages of using VooPoo Drag Nano

  • There is limited space for refilling or holding e-juice. 
  • VooPoo Vinci Pod Kit

    The pod kit operates on an inbuilt 800mAh battery which is recharged always using a micro USB cable. It is also powered by a VooPoo chip that allows the rapid power output to a maximum of 15Watts.

    The Pod comes in various colours such as grey, red, carbon silver, among others. The VooPoo Vinci Pod Kit comes with a tank of a capacity of 2ml, and the airflow is adjustable to give a restricted airflow for direct to lung and mouth to lung. 

    The pod kit includes resistant coils, and it ranges between 0.6ohm to 3ohm. 

    Design of the Pod

    The VooPoo Vinci Pod Kit is small in size, making it easy to carry around and packs a smaller battery. The casing of the pod kit is made up of zinc alloy, which makes it lightweight and gives a premium feel to your palm. The coating is oil-proof hence preventing glares, and also the device is shockproof. 

    Battery Performance

    The pod Kit comes with a battery of 800mAh that can be recharged using a micro USB cable. The VooPoo Vince comes with safety measures such as short-circuit protection, overcharge protection, among others. 


    Advantages of using VooPoo Vince Pod

  • It has an adjustable airflow
  • Its battery shelf life is long
  • It has a compact design
  • It has an incredible battery quality, hence making it last longer. 
  • Disadvantages of using VooPoo Vince Pod Kit

  • It does not have the best adjustable airflow
  • The coils cannot be replaced
  • VooPoo Drag Resin Edition Manual Instructions

    To switch the power on and off.

    To switch the device on, press the fire button five times rapidly.

    Mode Switch Instructions

    To switch various modes, press the fire button continuously to change between the four interfaces. 

    Adjusting the temperature 

    For temperature adjustment and change, the following are easy steps on how it can be done:

    If the temperature was initially set at 100C, keep pressing the down button, and the temperature will turn to 600F. 

    Wattage control Instructions

    For the wattage adjustment, press the fire button continuously, directing you to the wattage interface. The adjustable wattage goes up to 80W.

    5-129W is the normal mode, and each step bears 1 Watt

    130-157W is the supermodel. The resistance in this mode is 0.1-0.30, whereas the voltage regulation ranges from 0.5-7.5V

    Locking and Unlocking the device

    To lock the device, press the fire button and up button simultaneously for 1.5 seconds. To unlock the device, press the fire button and the up button simultaneously for the same time. 

    Function Menu

    To enter into the function menu interface, press the up and down buttons concurrently for 1.5 seconds. Press the up or down button together to choose a function later. To make the confirmation, press the fire button and head on to the next step. 

    In case you may need to make any adjustments, press the up or down button at the same time. Once you finish the adjustments, press the fire button for about 1.45 seconds, and the device will automatically return to the working interface. 

    Sleep Mode

    The screen will automatically turn off if there is no action for about 30 seconds. Additionally, the device will switch to sleep mode if there would be no operation going on for 30 minutes. 

    FAQS about VooPoo Drag Resin Edition

    How long does a VooPoo Drag last?

    If you vape with a wattage level of 80W, the battery can last for about 6-7hours, which means it can last for a full day. 

    Can VooPoo Drag Resin be recommended?

    One of the best pod vapes is recommended since it is also designed as a sub-ohm vape using high resistant coils. 

    Alternative Vape: UPENDS


    UPENDS is the new rising e-cigarette brand. With this device, you can put the flavour of your choice. UPENDS is still the leading brand and wholesaler of vaping products.

    Uppor is one of the super valued pod systems in UPENDS because of its performance. It is most suitable for pod mod users who prefer RDL vaping for a thicker and more amazing experience. 


    The above article clearly shows how the VooPoo brand has brought a positive change in the vape industry. The VooPoo Drag Resin Edition has made vaping easier and comfortable since it has a gene chip to regulate all protections such as overcharging and short circuits.


    To use the UPENDS website you must be aged 21 years or over. Please verify your age before entering the site.