z

Search

    z
    z

    The Metrix Vape Pen. A Complete Review of the Metrix Vaporizer

    The Metrix Vape Pen. A Complete Review of the Metrix Vaporizer

    What is a Metrix vape pen?

    The Metrix vape pen is a new design by Metrix with a sleek design and comes in a variation of colors.  It has a battery capacity of 650mAh end of 510 thread capability, which makes it compatible with most cartridges.

    It is a breath activated vape pen which may look small but functionally strong. The weapon has an aluminum alloy housing and has only one button embedded on its shaft. The battery comes with the quick to charge feature that will make your work easier minimum time is required during charging.

    When you purchase the Metrix vape pen, you get one weapon in the box a micro USB charger, a portable USB adaptor and an instruction manual. The cartridges are pretty easy to refill.

    The vape pen has three voltage temperature settings which give you the freedom to navigate and choose which temperature is suitable for your Vaping. The LED lights embedded on the power button will change different colors, alerting you to the different holding temperatures and the battery charge capacity.

    Metrix vape pen performance

    Metrix is an exclusively inexpensive vape kit that anyone should have by their side. Metrix has a battery capacity of 650mAh, and it comes with a micro USB charger. Metrix vape pen Falls under the 510 thread, which makes it compatible with most of the cartridges. 

    Its battery is slim and powerful, which gives variable voltage. The vape pen has a single button on its shaft, two clicks on the button preheat the pen, and three clicks on the power button changes the voltage variable.

    The battery has three voltage temperatures; there is 3.4 volts, 3.7 volt and 4.0 volts. These different voltage temperatures allow you to regulate the right temperature suitable for your Vaping. The Metrix vape pen comes in various colors; white, black, grey, red, green and pink. These Colors allows you to make a selection that that best suits your personality and taste.

    The vape pen uses stick concentrated oil to give you the most flavorful creamy thick vapor.

    Features of the Metrix vape pen

    • It uses a 650mAh battery capacity with variable voltage
    • It has a lifetime warranty
    • It has an automatic inhale activated system
    • It is operated by a button which is situated on the shaft
    • It has the 510 threaded capability, which makes it compatible with most of the cartridges
    • It comes with a wireless USB charger 
    • It has a sleek design that is beautiful and easy to carry along. It can fit perfectly in your pocket or your purse.
    • The Metrix vape pen uses concentrate oil.

    Instructions on how to use the Metrix vape pen

    The first thing to do is switch the fan on, which is done by clicking the power button five times rapidly. It will flash green, indicating that it is on. Then it is time to activate the battery, which is done by pressing the power button and holding it for 2 seconds.

     

    After activating the battery then you need to activate the preheat mode, which is done by clicking the power button two times and the LED light with glow Green. 

    If you need to turn off the preheat mode, click the power button once, and it will go off. 

    How to charge your Metrix vape pen

    Nothing can be more frustrating than realizing your Vape pen is out of charge just when you need to use it.  You can always check the battery level on your pen by clicking the stylus button three times.  When the light turns up red, then you know it is time to recharge your pen. 

    To charge your battery, all you have to do is to screw on the USB charger, make sure it is firmly attached, and then plug it into a power source. The pain comes with rapid charge mode; therefore, you do not have to worry about slow charging if you are in a hurry.

    All you have to swipe your finger over the O on the charger. The LED light will automatically turn from red to green when your battery is fully charged, and then it is time to unplug it from the power source.

    Pros and Cons of Metrix Vape Pen

    Pros

    • It is easy to use; even new users can figure it out
    • The sleek design and portability makes it easy to carry along
    • It is discreet
    • The flavor and vapor quality are above average
    • It has an excellent starter feature
    • It has a 510 thread capability
    • It is very affordable and readily available

    Cons

    • The mouthpiece heats up pretty fast 
    • It needs a lot of maintenance

    Frequently asked questions

    What is the meaning colors on my vape pen mean?

    The Metrix vape pen has LED lights located on the power button, which changes different colors to indicate different voltage temperatures and charge level. The color green will indicate that the battery is fully charged as you continue to use the pay, and the battery will become depleted and change the color to yellow.

    The color will then change to orange and then red. When you notice the LED indicator turns red, then this is the ideal time for you to connect your vape pen to the charging system.

    What is the meaning when my vape pen is blinking?

    If you realise that your vape pen is blinking, this issue is typically caused when your battery is loosely attached.  If the battery is loose, it will not charge fully, and the indicator will continue to blink. To fix this problem, you have to unscrew the battery and re-screw it back and make sure it is firmly connected this time around.

    What color is the highest setting on my vape pen?

    The highest temperature setting on the Metrix weapon is 4.0 volts which are indicated by the color green. These temperature setting will give you the most significant vape hit, but the flavor will not be as good. It is at this point that some THC cartridges may start to burn due to the voltage setting.

    The medium temperature is 3.2 volts, and it is perfect for giving feasible and flavorful vapor. The color red shows this temperature setting. 

    The lowest temperature setting is 2.4 V; it is just the right temperature for vape cartridges made for using low voltage settings.  The low-temperature setting is represented by the purple color of the LED light.

    Another temperature setting level is the Dab stage; this is the voltage temperature used with the 510 thread, and it's indicated with the blue lights. This voltage temperature is used for vaping extracts of cannabis.

    Conclusion

    Conclusively, we strongly advise which one while handling the vape pen batteries. Always make sure you store the battery in a non-conductive container to avoid any unnecessary accidents.  The vape pen can cater for both e-liquid and cannabis oil.

    The vape pen is easily portable there for you can carry it along anywhere you go, for it can fit perfectly in your pocket or your purse. The pain is easy to use and self-explanatory; therefore, even new users will not have any trouble using it.

    AGE VERIFICATION

    To use the UPENDS website you must be aged 21 years or over. Please verify your age before entering the site.