Review and Instructions of Innokin Zlide: The MTL Tank

    Review and Instructions of Innokin Zlide: The MTL Tank

    Vaping is becoming more known amongst smokers. E-smoking has also helped a lot of addicted smokers to quit smoking while still enjoying what it is like to smoke. Vaping is regarded to be safe for the health, unlike regular smoking. And there are a lot of vape devices smokers can use to enjoy an awesome vaping experience. However, the quality of vape is what determines how best you enjoy the hits and that’s why in this guide, we have talked about a product of a high-quality and fast-growing vape brand in the industry; Innokin Zlide MTL Tank.

    1. What is Innokin?

    Innokin is one of the outstanding manufacturers of innovative, well designed and top quality standards of electronic cigarettes and advanced personal vaporizers worldwide.Innokin was founded in 2011 in Shenzhen, China. Innokin has a wide range of products from e-cigarettes, e-liquids, vaporizers and accessories. Their official website address is where they offer their products at very affordable prices without beating down the quality.

    2. Innokin Zlide MTL Tank


    2.1 Product Details

    The Innokin zlide MTL Tank is one of the top satisfactory vape products in the Innokin's platform series of beginners friendly products. Designed by Phil Busardo and Dimitris Agrafiotis, Innokin was made to cater for vape users that want to start the mouth to lung vaping (MTL). The Innokin zlide MTL Tank was not produced to replace the Innokin Zenith MTL Tank, the Innokin Zenith has its functions and features made specifically for it. However, the Innokin zlide has the exact coil as the Innokin Zenith and all other of the Platform series. The Innokin zlide MTL tank is a 22 mm tank that matches 2 ml of e-liquid. It features a slide-to-open replaceable glass tank, plex3D coil, fill system and air flow and also two drip tips that act as child protection. Installation of the coil is just like the Innokin Zenith. Begin with 4-5 drops of juice into the coil, then you unscrew the bottom of the tank and put in the coil using the notches as your guide. Ensure you have the bottom of the coil lined up appropriately and everything is put back together. Leave it to soak up and saturate for about five minutes, then set your wattage to the recommended wattage and you are ready to vape.

    One very notable feature of the Innokin zlideand an improvement on the Innokin Zenith is the slide-to-open replaceable glass tank. Aside from the fact that the glass tank can be replaced if it breaks, it can also be taken apart for cleaning. The Innokin zlide coils are long-lasting coils for mouth-to-lung vaping. The 1.6-ohm coil with a strong throat hit and a slightly tighter airflow is a great choice to have a good vaping experience if you vape on very high nicstrengths.

    The Innokin zlide airflow is very identical to the airflow of the Innokin Zenith. It varies from slightly loose MTL to a very loose MTL that bounds with a very restrictive DL draw and you can even make it tighter by closing the first hole midway. Another astonishing feature of the Innokin zlide MTL tank is the QR code card that is added to the package. It has a list of Phil Busardo’s instructional videos on almost everything from preparing the tank for your first use to changing the glass tank and you can access them all by simply scanning the QR code.

    The Innokin zlide MTL Tank has the following:

    Zlide tank (0.48-ohm plex3D installed)

    A Spare 1.6-ohm coil

    A spare glass

    A spare drip tip

    A spare O-ring set

    A quick start guide

    2.2 Specifications and Parameters

    Diameter: 22 mm

    Capacity: 2 mL

    Pyrex glass reinforcement

    Stainless steel construction

    Top refill system - sliding top cap

    Removable sliding top cap

    Compatible with entire Z-coil line Detachable structure

    Locking 510 proprietary drip tip

    510 Connection

    2.3 Features Of Innokin Zlide MTL Tank

    2.3.1 Battery Life and Charging

    Innokin zlide MTL Tank has an excellent battery life of 3000mAh with a USB charging port at the base. If you use the 0.48-ohm coil, you would easily use the Innokin zlide for 48 hours even on the highest wattage. If it’s a 1.6-ohm coil on a 12W setting, it would last for more than 4 days. And thanks to the 2Amp fast charging, it would take you only one hour to get fully charged.

    2.3.2 Flavour

    You can enjoy the diverse choice of flavour with the Innokin zlide MTL Tank to enjoy vaping. Whether it is peach, mango or papaya, you are good to go. It all depends on your choice of flavour and the Innokin zlide got you covered.

    2.3.3 Different Colours

    With the wide selection of colours like; black, white, sky, forest camo, ocean, and purple, you can pick any colour of your choice and still enjoy the same vaping experience anyway.

    2.3.4 Ease Of Use

    The Innokin zlide MTL Tank is very easy to use that it requires just three clicks to either put it on or off.

    2.3.5 Portability

    The elegant soft rubber that surrounds most of the body makes it light in weight. You can easily hold it in your palm and also fit perfectly well into any of your pockets.

    2.4 Pros

    Excellent Z-coils

    Glass is replaceable

    Excellent flavour

    Phil Busardo's instructional videos for new vapers

    Airflow is smooth

    Four coil alternatives

    Clean and easy coil installation


    Great quality and design

    2.5 Cons

    It can only take 2 ml of juice

    Changing the glass can be quite complex

    Does not have the tightest MTL draw

    2.6 Is Innokin Zlide MTL Tank worth it?

    The Innokin Zlide MTL Tank is an excellent choice for both new and seasoned vapers. Compared to its antecedent, the Innokin Zenith looks much better fills up easily and most importantly, the glass can be replaced. The Innokin zlide MTL Tank is more like a complete production that seemed to have covered everything needed in a vape. It has an excellent choice of coils available. Apart from the lack of a very tight draw, the Innokin zlide MTL Tank is a good example of the best beginners friendly MTL tank. The lack of the complexity of the Innokin zlide MTL Tank makes it a perfect vape device for beginner vape users to know everything about vaping and also providing an amazing vaping experience at affordable prices. On the flip side, if you are an advanced vape user, the absence of extra power modes could be a discouragement. And you would most likely get tired quite fast with the tank especially if you are a vaping enthusiast. The Innokin zlide MTL tank looks very good and quite less chunky than the Innokin Zenith most especially with the drip tip platform taken out thereby giving it a smarter and sleeker look and also good drip. The Innokin zlide MTL tank can easily strip apart for cleaning, the threads are also smooth. Import which can be easily slid to fill is very rigid that once it is locked into place with the drip tip, it becomes very solid. The Innokin zlide MTL tank nevertheless uses the push and pull method of taking out the coils and replacing them which can be done even when the tank is filled. The Innokin zlideMTL tank is so versatile that it can be used with all the Z-coils in the Platform line. The Innokin zlide MTL tank is indeed an excellent heir of the Innokin Zenith that fixed any problems the Innokin Zenith had. And until the arrival of the Innokin Zenith II, the Innokin zlide MTL tank is the best mouth-to-lung tank you can ever buy especially as a beginner vape user. So, if you don’t have the Innokin zlide tank yet, it is highly recommended you get it for an amazing MTL vaping experience as it has the best Z-coils and the prices are very affordable.

    3. Frequently Asked Questions about Innokin Zlide MTL Tank

    3.1 How long does the Innokin Zlide coil last?

    The Innokin Z-coils are very long-lasting coils for mouth-to-lung vaping. It can last for up to 4 weeks and you can easily attain 15 refills of 30ml in the Zlide tank on the 1.6-ohm coil and would still have an excellent performance.

    3.2 How do I clean my Innokin Zlide MTL tank?

    Get a paper towel, warm water with a little bit of soap, remove the air flow ring and coil and ensure you keep an eye on the O-rings as you don’t want to lose them. Dip the paper towel into the soapy water and clean the Zlide tank. Make sure to rinse off the soapy water thoroughly and leave it to dry for about 5 minutes before using.

    3.3 What is the best liquid to use with the Innokin Zlide MTL tank?

    E-liquids with at least 50% PG with the 1.6-ohm coil is the best. However, if you are using the 0.48-ohm plex 3D coil, e-liquids with at least 50% VG is highly recommended.

    4. Alternative Vape Equipment: UPENDS


    Uppor is a high-quality pod mod system with excellent performances. The affordable price of Uppor beats other pod mod system brands. Uppor is a dream come true for many pod mod users that have a preference for RDL or DL vaping to enjoy an amazing thicker vapour experience. We highly recommend you try Uppor today and experience how amazing vaping our products can be.

    5. Conclusion

    One of the best vape tanks out there is the Innokin Zlide MTL Tank. The tank is quite easy to use and it comes in a design that would catch your attention. These and many other features make it stand out amongst its peers. To check out more awesome vape products, visit UPENDS.COM.


    To use the UPENDS website you must be aged 21 years or over. Please verify your age before entering the site.