What is a Pax 3 vape pen
The Pax 3 vape pen is the most recent release by the pax labs company. The San Francisco-based company has been so dedicated to the development of vape products and they do it with cutting-edge technology.
This pen was created to succeed the pax 2 vaporizer. The Pax 3 comes with a slim feminine look on its casing it might be easily mistaken for a beauty product. The notable feature that differentiates the Pax 3 from the pax 2 is the 30m seconds heating which could even be less.
The pen comes with a 4 temperature pre-setting which can be done using an app. The stainless steel oven and vapor path do not differ much from the pax 2 and also mutes the overall flavor of cannabis. On the outside, nothing much has changed.
The design quality of the Pax 3
One notable feature about the Pax 3 is that it looks so much like the pax 2. Most of the components of this device have not changed except for the heating chamber, vapor path, and mouthpiece.
The aesthetic finish of the Pax 3 also sets a major difference. The company included a half-pack lid for the cartridge that allows you to use the device without having to put so much cannabis.
This is something customers have wanted for a long time and people are happy it is finally available.
The Pax 3 is equipped with a concentrate container that is to be used for wax and concentrates. This could be one of the ways this company is trying to make its products multi-functional.
The added Bluetooth function further helps in customization but it would be better if they used a different coating because the current one resembles a pax 2.
Pax 3 app
The app on the Pax 3 allows you to set custom temperatures and also gives you various heating modes that will highly change how you operate with your device. The modes below are the ones available in the appsettings.
Standard- this is the most basic setting that boosts the temperature in the oven by five degrees every time you take a hit. It helps to maintain the temperatures and drops it back down until you take another draw.
Flavor- this setting works similarly to the standard model but it focuses more on heat production. This implies that once the pen has gone through its initial heat-up when you take a draw, the temperature will move up quickly to keep the temperature in check and then drop to cool until you take another draw.
This setting does a better job in keeping the flavor in between draws because it rapidly cools down and wastes less cannabis if you do not remember to take another draw.
Boost- this mode of heating works by increasing the aggressiveness of heating while taking draws from the unit and reduces the cooldown time when you are not taking draws. This setting works best for people who seek to get in a quick session with denser vapor.
Efficiency mode- this mode slowly increases the temperature by one degree throughout your session. This happens as it maintains the standard mode heating algorithms.
Stealth profile- when using this heat profile, the device dims the light and has a more aggressive cool down between draws to produce less odor.
Using the Pax 3 vape pen
This pen is mostly functional like the pax 2. To start the pen, you have to remove the magnet cap found at the bottom of the device to display the heating chamber. In this chamber, you will fill your favorite cannabis and put back the bottom onto the unit.
To turn on the device, you will need to press on the center of the mouthpiece located on the top of the device.
You can then proceed to hold the power button to navigate through the temperature settings. By pressing the power button, it will go through the five temperature settings.
The first four are normal temperature settings available in Pax devices, the fifth one is customizable and can be controlled through the app.
Once you select the best temperature for your device, you then press the power button to set the temperature. The device automatically starts to heat your compounds to your desired temperatures.
To attain the required temperatures, the device heats up for fifteen seconds. When the set temperature is attained, the device vibrates and the lights turn green allowing you to take draws from the mouthpiece.
The best way to use this device is by utilizing eth concentrated that comes with the concentrate container. Fill up your wax or concentrates and insert them into the oven of the Pax 3.
The container slightly sticks out for easy pulling out. It is recommended that you use the highest temperature setting for heating the Pax 3.
The Pax 3 is equally portable as its counterpart the pax 2. It is 3.87 inches tall and 1.2 inches wide, this implies that you can carry it around in a purse or pocket and you will not even realize you have it with you.
Pax 3 performance
We have already learned that the device comes with four temperature presets, 182°C, and 193°C. 204°C, 215°. There is also a fifth setting that can be regulated anywhere between 182° and 215°C. Even with the available temperature present, this device would have been much competitive if it had temperatures above 230°C.
In terms of vapor quality, the Pax 3 still maintains the signature vapor quality. This could be slightly enhanced by the improved heating oven and vapor paths. For better results, use a de-humidor box to dry your cannabis before your concentrate container.
The vapor you get from the Pax 3 is smooth and very satisfying. You can easily regulate the temperature using the provided heat settings. The only disadvantage is the use of conduction heating instead of convection heating which produces the purest flavors.
The heating modes are the biggest differentiators of pax 2 and Pax 3, this is because, on Pax 3, you can choose the boost mode to give you a punch session.
The battery life of the Pax 3 is one thing we are very happy about. The pax labs have finally increased the battery capacity with fewer changes on the size of the pen. The device is fitted with a 3500mAh built 18650 battery that gives extra 500mAh power.
Even though the change in battery does not seem significant, you are sure that it will last you through an extra one or two sessions if you do not have the charger with you. You can also note that the device charges up quickly in less than two hours when it is fully used up.
Pros and cons of Pax 3
- The device has a small design that is portable and discreet
- Beautifully designed and sleek material design
- Compatible with the Pax mobile app for android
- Powerful in terms of conducting heating
- Not highly powered like the large vape pens
- The battery is not removable
- The heating chamber is smaller compared to other similar devices
- Pax app unavailable on apple due to the ban on vape apps
- Stainless steel chamber is less preferred compared to ceramic
FAQs about the Pax 3
Is the Pax 3 worth it?
The Pax 3 is a good device, and it has amazing features that are attractive to users. You can use the device discreetly because it is simple, small, and highly portable. The ability of the device to be compatible with an app makes it easy to control.
How do you charge the Pax 3?
The Pax 3 comes with a USB charger that you connect to the device. The device has a port at the bottom that can hold the charger which you will connect to a source of power either using a wall charger or a charging block in a car.
The Pax 3 is a good successor to the pax 2 vape pen. It has outstanding features that cannot be compared to any other kind of device.
The temperature control features are specially making it a reliable phone that can be used on any occasion.
From this device, you can see that Pax Lab is dedicated to delivering quality products to the market that clients will fall in love with.
Ensure you check UPENDS products. They sell the best vaping devices at affordable devices. For refillables and disposables all you need is an UPENDS vaporizer.