Innokin Adept Zlide Kit Review: Features, Performance and Alternative Device

    Innokin Adept Zlide Kit Review: Features, Performance and Alternative Device

    What is Innokin Adept Zlide Kit?

    Innokin Adept Zlide kit is a rugged box mod for the Zlide that comes as the newest in the line of vape products. The designers of this mod, Dimitris Agrafiotis and Phil Busardo, made it rugged (IP67 rated). It is quite the best MTL tank that fits the MTL vapers.

    The Adept has a built-in 3000mAh battery with 8 wattage levels an in two different modes. Based on the IP67 certification, the Adept Zlide kit is waterproof up to 30 minutes in a depth of 1m and dust-resistant box mod. The silicon layer protects the device and makes it shock-absorbent.

    The mod has the LED bar-style screen display and features the Zlide tank. It is an easy to use tank kit and is marketed as an excellent performing and a good replacement to other popular box mods.

    The charging port of the Adept includes a silicon plug that acts as a sealant. It has a sturdy rubberized finish that has a soft feeling when you touch with a comfortable grip. Designed with an intelligent auto-wattage, it automatically detects the coil resistance to adjust to required wattage range.

    Contents of Innokin Adept Zlide Kit

    1 Innokin Adept box mod

    1 Innokin Zlide MTL tank

    1 Plex 3D 0.48 ohm coil

    1 1.6 ohm coil

    1 Extra drip tip

    1 Extra glass tube

    1 Micro USB charger

    1 Spare O-rings

    A user manual

    Features of Innokin Adept Zlide Kit

    Thread material designed from stainless steel

    Has an internal battery with a capacity of 3000mAh

    The maximum voltage for this device is 5.5 Volts

    Has the 510 thread type which accepts 510 threaded tank/atomizer

    Features the spring-loaded connection style

    Comes with the Innokin Zlide MTL tank

    The tank can accommodated 2ml of e-juice

    Features Zenith series coil compatibility

    The resistance range is from 0.4 to 3.0 ohms

    As mentioned, Innokin Adept Zlide kit is small and very compact box mod. You can easily slip into your pocket and enjoy vaping on the go. It is 8mm tall, weighing 157.7 grams. Considering it carries a 3000mAh battery, it is lightweight.

    The Adept Zlide body features a rich layer of squidgy silicone which is soft and offers a good grip. Both the top and the bottom has a metal finish, finely polished. It has a power button and the adjustment button which are all solid and clicky and they don’t rattle. Both the buttons and the screen are plastic made or covered with plastic. This is essential for a mod with shock-resistant features.

    The 510 comes at the center which is a convenient feature that most vapers can appreciate. You can feed the Adept Zlide with atomizers of up to 26mm and doesn’t overhang.

    The tank is an enhanced version of the famous Zenith. It can hold a 2ml e-liquid and is perfectly housed in a stainless steel casing. You can hardly break it because of the solidity. The child-proof drip tip is a regular 510 and has an elongated base that prevents the top fill items against sliding open. The Zlide tank itself features 4 tiny holes you can easily see at the base. This allows you to conveniently adjust the airflow.

    With 3000mAh battery, the Adept mod can produce up to 17W. This makes it strictly an MTL type box mod. In simple terms, you can manage large clouds with this device, thus, it is not suitable for those who like big clouds. This reduces some if its versatility but adds the ease of use.

    How the Innokin Adept Zlide Kit Performs

    The Innokin Adept Zlide kit is a simple to use box mod just straight from the appearance. To fire on the device, you press the power button three times. The device then recognizes the coil resistance and picks an ideal power mode. If the coil resistance is above 1 ohm, the device picks the lowest power mode, between 11 and 14 watts. If it is below 1 ohm, it sets to a higher power mode which is between 14 and 17 watts.

    The arrow that appears at the bottom of the screen points right or left based on the mode. The base of the device has reference details which you can find helpful. The small upfront button helps in changing the wattage in a preferred power mode with 1W increments. This shows on the display in a form of four bars.

    With constant output, it is hard realize any difference in terms of performance not unless the battery becomes low. Therefore, you can always have a consistent vaping experience once you fully charge the battery.

    The power levels of the device appear nicely on the bottom although there is no provision for further adjustment. That means, an RDA with a 1.2 ohm coil cannot perfect work on it. It is truly a mouth-to-lung mod.

    Battery Life and Charging of the Innokin Adept Zlide Kit

    The Innokin Adept Zlide kit features an in-built battery with a massive capacity of 3000mAh, although small and portable. With a single full charge, with 0.8 ohm coil and alternating between different levels, you go through 2 or more tanks. This can confidently fulfil most vapers’ daily vaping requirements.

    The sign of the battery is above the power bars. It illuminates when you start vaping and different colors indicates different battery levels. The Green LED light means the battery is between 60 and 100%. The Orange LED light indicates a power level between 20 and 60% while Red means the battery is below 20% and needs charging.

    When you plug the device into power mains, the battery sign lights, an indication of a charging battery. Once fully charged, the sign goes off. Based on the specs, the Innokin Adept Zlide has a charging rate of 2 amps. It takes more than two hours to fully charge because of the battery capacity. It supports the pass-through charging. This means you can vape while the device is on the charge.

    Pros and Cons of Innokin Adept Zlide Kit


    The device has a wonderful built quality

    Very comfortable when in your palm

    Black makes it look great

    It is rugged and shock-absorbent

    Practical weight and size

    Simple to operate

    Tailor-made to fit Zlide tank

    The firing button is large and feels clicky

    Long-lasting battery ideal for MTL vaping

    High quality Zlide MTL tank

    The coils are great especially a 0.8 ohm tank


    Can reach 17 watts only

    The silicone corners always fade with time

    Innokin Adept Zlide Kit vs SMOK Thallo 80W Pod Mod Kit

    Just like the Innokin Adept, the SMOK Thallo 80W pod mod kit has a battery capacity of 3000mAh. The SMOK Thallo has 16 ohm RPM 2 mesh coil rated for 20-25W and 6 ohm RPM 2 DC MTL coil rated for 12 – 25W. The SMOK is both a DL and MTL vaping device, unlike the Adept Zlide.

    FAQ about Innokin Adept Zlide Kit

    How do you fill the Innokin Zlide MTL Tank?

    Slide a top cap which reveals the huge filling port on the device. With a favorite e-liquid, feed it into the tank. Wait for 5 minutes for perfect saturation of the coils and then you can start vaping.

    Can the Innokin Adept Zlide Kit deliver vapor, flavor and experience required?

    True. With vapers who have recently quit smoking cigarettes, the flavor delivery of Innokin Adept is spot on. Generally, the Adept does a great job, especially in limiting airflow to zero, you receive a tight draw you can fully enjoy. You can find a perfect hit throat you want.

    Does the Innokin Adept has safety protections?

    Yes. The Innokin Adept Zlide kit comes with a number of important safety protections. They include the overcharge discharge, overcharge, over voltage, short circuit protection and overheat protection. It also features the cut off and high resistance protection.

    Can you replace the Innokin Adept Zlide kit battery?

    Not really. It is very hard to replace the battery because it is in-built. This is the reason why it has a bigger capacity that can last for ages before you buy a new kit.

    How long can Zlide coils last?

    The Zlide coils of Innokin Adept are designed to last long. You can make several refills with the tank and still withstand the test of time.

    Alternative Vape Device: UPENDS


    If you are looking for a quality replacement pod mod system, then the Uppor by UPENDS is an ideal choice. This is a premium value pod mod that has two coils and intelligently identifies the coils. It features 5 layers of leak-proof to avoid chances of leakages. Besides, it is a portable pod mod system that fits in your palm.


    If you are a starter in the vaping industry, certainly you will appreciate the Innokin Adept Zlide kit. It has simple features that makes it easy to use. The device’s ruggedness, the amazing flavor production and the overall performance is great.


    To use the UPENDS website you must be aged 21 years or over. Please verify your age before entering the site.